FLEXIBLE CORRUGATED STAINLESS TUBE FOR MIXERS, LENGTH 800 MM
Flexible tap connection 800 mm made of stainless steel is designed to be connected to the plumbing system of faucets in the kitchen or bathroom. Suitable for both cold and hot water. A flexible hose is used where it is impossible or difficult to pass a rigid pipe. The eyeliner is made of flexible heat-resistant rubber with a protective sheath. Damage resistance is increased due to the reinforcing metal thread.
The flexible hose is connected to the shut-off valves of the water supply by means of a union nut, to the mixer - by means of a fitting. Tightness is ensured by rubber seals.
Connecting size of the mixer inlet: 1/2 "and 3/8"
The bellows connection for the mixer is more hygienic and safer for human health. The very absence of a rubber tube serves as an additional guarantee that the water passing through the liner is not enriched with harmful substances in the case of using low-quality toxic rubber.
The temperature regime of the bellows connection for the mixer up to +150 degrees Celsius will not leave indifferent those consumers who can supply hot water to the system with overheated water, which leaves no chance for other types of braided flexible connections to survive.
The mixer inlet has a minimum internal passage diameter of 8 mm. It is measured between the corrugation tops concave inside the metal hose axis. In comparison, the inner diameter of the traditional hose line is 6.0 to 7.0 mm. It is easy to calculate that the bellows connection for the mixer, all other things being equal, has a throughput capacity that is 50% higher than the usual one. This difference is especially important in the case of a weak pressure in the water supply system of the house.
The use of a bellows liner for a mixer will give you the opportunity to make a decision on the expediency of saving water, and not forcedly to save. In addition, do not forget about some types of modern water-consuming equipment such as washing machines and dishwashers, which have to drive their pumps much more often in order to pump the amount of water required for their cycles through a tube with a hole of only 7 mm.
To connect plumbing equipment that requires an increased supply of water, such as storage water heaters, hydraulic accumulators, a special double bellows line of large diameters is used.
The flexible hose is connected to the shut-off valves of the water supply by means of a union nut, to the mixer - by means of a fitting. Tightness is ensured by rubber seals.
Connecting size of the mixer inlet: 1/2 "and 3/8"
|
The name of the flexible hose for the mixer |
Marking |
Price |
|
Mixer lead, length 800 mm, stainless steel |
HF-C 800L (pair) |
470 rub |
The bellows connection for the mixer is more hygienic and safer for human health. The very absence of a rubber tube serves as an additional guarantee that the water passing through the liner is not enriched with harmful substances in the case of using low-quality toxic rubber.
The temperature regime of the bellows connection for the mixer up to +150 degrees Celsius will not leave indifferent those consumers who can supply hot water to the system with overheated water, which leaves no chance for other types of braided flexible connections to survive.
The mixer inlet has a minimum internal passage diameter of 8 mm. It is measured between the corrugation tops concave inside the metal hose axis. In comparison, the inner diameter of the traditional hose line is 6.0 to 7.0 mm. It is easy to calculate that the bellows connection for the mixer, all other things being equal, has a throughput capacity that is 50% higher than the usual one. This difference is especially important in the case of a weak pressure in the water supply system of the house.
The use of a bellows liner for a mixer will give you the opportunity to make a decision on the expediency of saving water, and not forcedly to save. In addition, do not forget about some types of modern water-consuming equipment such as washing machines and dishwashers, which have to drive their pumps much more often in order to pump the amount of water required for their cycles through a tube with a hole of only 7 mm.
To connect plumbing equipment that requires an increased supply of water, such as storage water heaters, hydraulic accumulators, a special double bellows line of large diameters is used.
Flexible bellows connection for mixer technical characteristics
- Bellows lead material: stainless steel AISI 304 (annealed).
- End piece material (union nuts, unions): brass CW614N according to UNI EN12164
- The end plate under the union nut is welded to the mixer inlet, the material is stainless steel AISI 304
- Mixer connection size: 1/2 "and 3/8"
- Type of connection of the mixer inlet: nut-union
- Minimum inner diameter of the mixer inlet: 8 mm (DN10).
- The length of the bellows connections for mixers: 30cm, 40cm, 50cm, 60cm, 80cm, 100cm, 120cm.
- Temperature range: -40 to +150 degrees Celsius, the mixer line can easily withstand exposure to overheated water.
